Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; for components see parts list: ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Left-hand Twist ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
Width [mm]: 13 mm ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Colour: Black ; Material: ACM (Polyacrylate) ; Material: PTFE (polytetrafluoroethylene) ; Fitting Position: Transmission End ; Weight [kg]: 0.097 kg ; ArticleState: Normal ; General Information: für Motorgehäuse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 21 mm ; Inner diameter [mm]: 115 mm ; Outer diameter [mm]: 120 mm ; Weight [kg]: 0.154 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Thickness [mm]: 12 mm ; Inner diameter [mm]: 100 mm ; Outer diameter [mm]: 130 mm ; Material: PTFE (polytetrafluoroethylene) ; Material: ACM (Polyacrylate) ; Supplementary Article/Supplementary Info: with sealing lip ; Fitting Position: Timing End ; Weight [kg]: 0.12 kg ; ArticleState: Normal ; General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Thickness [mm]: 12 mm ; Inner diameter [mm]: 115 mm ; Outer diameter [mm]: 140 mm ; Material: ACM (Polyacrylate) ; Material: PTFE (polytetrafluoroethylene) ; Fitting Position: Timing End ; Weight [kg]: 0.12 kg ; ArticleState: Normal ; General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Position / Degree: 1,2,3,4,5,6,7 º ; Component Number: 72-4527 ; Standard Size [STD]: ; ArticleState: Normal ; Technical Information: The following procedures must be carried out according to
the manufacturer's manual: 1) Drill two holes in the bearin
for the valve rocker's oil supply corresponding to the
position of the oil channels in the housing. 2) Drill one
dowel hole.
Oversize [mm]: 0.5 mm ; Component Number: 001HL10220050 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.126 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 35.95 mm ; for wall thickness from [mm]: 3.716 mm ; to wall thickness [mm]: 3.978 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: only supplied in parts list
Component Number: 227HL21012000 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.466 mm ; to wall thickness [mm]: 3.478 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
Component Number: 001HL10220000 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.126 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 35.95 mm ; for wall thickness from [mm]: 3.466 mm ; to wall thickness [mm]: 3.478 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: only supplied in parts list
Oversize [mm]: 0.75 mm ; Component Number: 001HL10220075 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.126 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 35.95 mm ; for wall thickness from [mm]: 3.841 mm ; to wall thickness [mm]: 4.228 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: only supplied in parts list
Oversize [mm]: 0.25 mm ; Component Number: 227HL21012025 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.591 mm ; to wall thickness [mm]: 3.728 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
Oversize [mm]: 0.25 mm ; Component Number: 001HL10220025 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.126 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 35.95 mm ; for wall thickness from [mm]: 3.591 mm ; to wall thickness [mm]: 3.728 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: only supplied in parts list
Oversize [mm]: 1 mm ; Component Number: 001HL10220100 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.126 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 35.95 mm ; for wall thickness from [mm]: 3.966 mm ; to wall thickness [mm]: 4.478 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: only supplied in parts list
Component Number: 227AL20875000 ; for housing diameter from [mm]: 137.65 mm ; to housing diameter [mm]: 138 mm ; for wall thickness from [mm]: 3.35 mm ; to wall thickness [mm]: 3.4 mm ; for shaft diamater from [mm]: 114.4 mm ; to shaft diameter [mm]: 114.75 mm ; ArticleState: Normal
Oversize [mm]: 0.5 mm ; Component Number: 227HL21012050 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.716 mm ; to wall thickness [mm]: 3.978 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
Fitting Position: Front ; Inner diameter [mm]: 99.5 mm ; Outer diameter [mm]: 105 mm ; Outer diameter 1 [mm]: 108 mm ; Height [mm]: 18 mm ; ArticleState: No longer supplied by manufacturer ; Technical Information: No Hardened
Weight [kg]: 0.76 kg ; Inner diameter [mm]: 115 mm ; Outer diameter [mm]: 120 mm ; Height [mm]: 21 mm ; ArticleState: No longer supplied by manufacturer ; Technical Information: No Hardened